2020.2

Table Of Contents
l
A data mapping configuration adds an "Execute Data Mapping" on page618 task. If
you agree to use the first sample file in the data mapping configuration as the process's
sample data file, the process's emulation will be changed accordingly.
l
A Job Creation Preset creates a "Create Job" on page595 task.
l
An Output Creation Preset creates a "Create Output" on page598 task.
When a template is dropped on a process, you can choose whether it adds a "Create Email
Content" on page590 task, a "Create Preview PDF" on page601 task, a "Create Print Content"
on page606 task, or a "Create Web Content" on page611 task (as an Action or Output task).
Using attached data files
When sending a Connect data mapping configuration from the Designer to PlanetPress
Workflow, all data files used in the document are automatically sent to PlanetPress Workflow
along with the data mapping configuration. These data files appear under the data mapping
configuration in the Connect section of the Configuration Components.
Setting an attached data file as a sample data file in a process
The attached data file can be used as a sample data file in a process. This sets the emulation
of the process ("About data emulation" on page59) and makes it possible to debug it (see
"Debugging your PlanetPress Workflow process" on page104).
1.
Make sure the Connect Resources section is visible by clicking the button if it
appears.
2. Expand the data mapping configuration (name.OL-datamapper) by clicking the button.
3.
Right-click on the data file, then click Set as sample data file.
Viewing an attached data file
1.
Make sure the Connect Resources section is visible by clicking the button if it
appears.
2. Expand the data mapping configuration (name.OL-datamapper) by clicking the button.
3. Double-click on the data file to open the data selector (see "The Data Selector" on
page842).
Page 42