2020.2

Table Of Contents
l (n) Ditroff format if the job file contains data in device independent troff.
l (t) Troff format if the job file contains data in troff.
l (v) Sun raster file if the job file contains raster images. This ensures that the printer
uses the correct filter to interpret the data.
l
Job name: Enter the jobโ€™s file name. By default, the variable %f (Job File Name) is used.
You may use a different variable, but you may not use a data selection. This information
may be used for the printerโ€™s banner page.
l
Job owner name: Enter the job owner name. You may use a PlanetPress Workflow
variable.
Advanced tab
l
Print speed: Enter the speed, in pages per minute (PPM), of the printer associated with
the printer queue. This value is used to determine how to divide jobs when you use the
Queue Balancing option for load balancing.
l
Commands: The list of available commands appears in this box. Select either Pre-job
commands or Post-job commands in the Selected box, and double-click a command
from this list to add it to the appropriate list.
l
Selected: Select either Pre-job commands or Post-job commands to add new
commands to the appropriate list and to see those commands that have already selected.
Double-click a command to remove it from the selected list.
l
Add: Click to add a new command to the list displayed in the Commands box. You must
then edit the new commandโ€™s description and value. Note that new commands are shared
by all printer queues.
l
Delete: Click to remove a command from the Commands box.
l
Command description: Use this box to edit the description of the command currently
selected in the Commands box.
l
Command value: Use this box to edit the code of the command currently selected in the
Commands box. Use the right-click menu for a list of standard printer control characters.
(See also: "Frequently used printer control characters" on page๎˜ƒ112.)
Note
If you plan to use an LPR output printer queue to send PlanetPress Design documents
Page 115