2019.2

you may want to detect, or data used for a specific condition. For example, if you wanted to filter
out any data for clients in Canada, you would want to use a data file that has at least one client
from Canada, to test whether your process filters it out correctly.
To choose a sample data file:
1.
Click the Debug tab in the PlanetPress Workflow Ribbon.
2.
Click on Select in the Data group.
3.
Use the Data Selector to choose your sample data file and emulation options (see "The
Data Selector" on page878).
4.
Click OK on the Data Selector.
Alternatively, if a resource file available in the configuration contains the necessary data file, it
can be attached to the process easily:
1. Expand the relevant resource files folder (Connect Resources or PPS/PSM Documents)
by clicking the button.
2. Expand the file by clicking the button.
3.
Right-click on the data file, then click Set as sample data file or simply double-click on
the data file.
For example, to use a sample data file included in a Connect data mapping configuration:
select Connect Resources > Data Mapping Configurations > [your data mapping
configuration], right-click a data file and choose Set as sample data file.
Tip
Double-clicking on the data file does the same thing as right-clicking on it an then
selecting Set as sample data file. Clicking Cancel instead of OK after viewing will
prevent this action from being taken.
Choosing a database sample file
To choose a database sample file:
Page 72