2019.2

Activating or deactivating a process
All processes are Active by default, but you may make any PlanetPress Workflow process
Inactive as required.
An inactive process will display in the Configuration components as red and strike-through.
Inactive processes can be useful for designing new processes in a live configuration. As the
process does not execute there is no danger of submitting it to a PlanetPress Workflow Service.
To activate or deactivate a process:
1.
Right-click the process in question in the Configuration Components pane
2.
Click Active to disable or enable the process.
3. Send the configuration. Because making a process active or inactive is a change in the
configuration, to make the change effective in the PlanetPress Workflow Service, you will
have to send the edited configuration to your PlanetPress Workflow Service (see
"Sending a configuration" on page141).
Note
If you try to send a configuration that contains only inactive processes, the PlanetPress
Workflow Configuration program will ask you to confirm the operation (this can be
changed in the Notification User Options).
Process properties
To have access to the properties of a process or subprocess:
l
Right-click on the process in the Configuration Components pane.
l
Select Properties.
You can also double-click on the process to show its options.
Page 132