2018.2

5.
From the Home tab in the Ribbon, choose Paste (or right-click and select Paste from the
drop-down menu).
To copy and paste tasks or branches:
1. In PlanetPress Workflow Process area, select the task or branch you want to copy and
paste.
2.
From the Home tab in the Ribbon, choose Copy (or right-click and select Copy from the
drop-down menu).
3. To paste the task or branch to a different process, select that process.
4. Select the task or branch crossing above which you want the task or branch to be pasted.
5.
From the Home tab in the Ribbon, choose Paste (or right-click and select Paste from the
drop-down menu).
A few notes:
l
When you cut an Input or Output task, it is replaced with an Unknown Task, that you will
need to replace with another task for the process to be functional.
l If you cut one task or branch, then cut another one, the first one is lost and replaced by the
second. Remember however that you can always undo the command to retrieve it (see
Undo a Command).
l Tasks and branches will always appear on top of (in other words, before) the task or
branch where you paste it. The only exceptions are Input and Output tasks which can only
be pasted on top of an Unknown Task.
Copying the Properties of a task or branch
Instead of pasting the actual task or branch, you can simply paste the properties of the task or
branch. To do this:
1.
Copy or Cut a task or branch of which you want to have the properties.
2. Select the task or branch where you want to paste the properties
3.
From the Home tab in the Ribbon, choose Paste Properties (or right-click and select
Paste Properties from the drop-down menu).
Page 730