2018.2

l error: The error message, or an empty string when no errors have been
reported for this record.
Document nodes with an error are selected, while those without an error are
unselected, to make looping through all errors easy.
Tip
To determine if there were any errors in a job and handle it accordingly, you
can use a Condition that checks if GetMeta(SelectedCount[0], 11,
Job.Group[0]) is greater than 0, immediately after the task (see
"Conditions" on page125).
OL Connect Proxy Tab
This tab is common to all OL Connect tasks and defines where to process the jobs sent through
these tasks. When these fields are empty, they use the defaults set in the OL Connect User
Options page of the preferences.
Note
Defaults are not used unless the configuration is sent to the Workflow service.
l
OL Connect Proxy Address: Enter the machine name or IP Address where the OL
Connect Server resides.
l
Port: Enter the port to use to communicate with the OL Connect Server. Default: 9340
l
User name: Enter the user name expected by the OL Connect Server.
l
Password: Enter the password expected by the OL Connect Server for the above user
name.
On Error Tab
For a description of the options on the On Error tab see "Using the On Error tab" on page88.
Page 525