2018.1

l
When you cut an input or output task, it is replaced with an Unknown Task, that you will
need to replace with another task for the process to be functional.
l If you cut one task or branch, then cut another one, the first one is lost and replaced by the
second. Remember however that you can always undo the command to retrieve it (see
Undo a Command).
l Tasks and branches will always appear on top (in other words, before)the task or branch
where you paste it. The only exceptions are input and output tasks which can only be
pasted on top of Unknown Task.
Note
Instead of pasting the actual task or branch, you can simply paste the properties of the task or
branch.
To copy and paste Properties of a task or branch:
1.
Copy or Cut a task or branch of which you want to have the properties.
2. Select the task or branch where you want to paste the properties
3.
From the Home tab in the Ribbon, choose Paste Properties (or right-click and select
Paste Properties from the drop-down menu).
Note
You can only paste the properties of an input task on the initial input task of your process.
Similarly you can only paste the properties of an output task on another output task.Also,
you cannot paste the properties of a task on a branch and vice-versa.
Note
You can paste only the properties of the On Errortab of any task or branch on another one.
Page 656