7.6 Business Edition

You will be given the option to choose port 8080 or port 8181. You should select the port which is
most likely to work on your system.
Port 8080: is an HTTP port which is normally left open by Firewalls but is often used by other
web applications – such as Apache, Sharepoint etc.
Port 8181: Will allow you to run Virtual Stationery alongside other web applications, but may
require you to modify your Firewall settings to open up the port.
After installation you should reboot your PC.
3. Configuration
The Virtual Stationery application is installed in Demo mode by default. In order to run it in any
other mode, you will need to obtain a Keycode from your supplier. The Virtual Stationery
Keycode is unique to your PlanetPress installation and will determine the mode that you are
allowed to use.
Demo Mode: Allows you to test and demonstrate the application. It supports three outputs, the
default output allows you to create PDFs, but two additional outputs can be added to demonstrate
printing. (note: the output will contain watermarks and the quality will not be so high)
The main configuration steps are as follows:
a) Login & Configure system settings
b) Setup your printer(s)
c) Setup Stationery
a) Login & Configure System Settings
Enter the following URL http://vsserver:port/ppsetting
Page 10