6.0

58
PlanetPress Talk Summary
3
MoveTo
RMoveTo
procedure Moves the current point to the specified coordinates.
Pie
procedure Creates a pie slice shape, which can then be rendered using stroke, fill,
or strokeandfill.
Rectangle
procedure Creates and draws a rectangle shape. The rectangle can optionally be
filled using the colour specified with the setfillcolor command. The
border can optionally be drawn using the colour specified with the
setstrokecolor command.
RectFill
procedure Creates and draws a filled rectangle shape. The colour used to fill the
shape can be specified using the setfillcolor command.
RectFillStroke
procedure Creates a rectangle that has both an outline and a fill color. You set the
color for the outline using setstrokecolor and the fill color using
setfillcolor.
RectStroke
procedure Creates and draws an empty rectangle shape. The colour of the pen used
to draw the rectangle can be set using setstrokecolor.
Scale
procedure Scales the result of all commands that follow the scale() command.
SetAngle
procedure This command rotates all subsequent commands by the angle specified.
Most commands and objects that are displayed/printed on the
document are affected by the setangle command.
SetDash
procedure Set the properties of a dashed line. Any drawing done after setdash()
draws dashed instead of solid lines. You can revert to solid lines by
calling setdash() with an empty array as a parameter.
SetFillColor
procedure Sets the colour used to paint the insides of any closed shapes when
issuing a fill or a strokeandfill command.
SetLineWidth
procedure Sets the width of the pen used for drawing lines, boxes and other
objects. When setting the line width, remember that the exact location
of the pen is on the middle of the line, with the stroke spilling over
equally on both sides.
SetStrokeColor
procedure Sets the colour of the pen used for drawing lines, boxes and other
objects.
Stroke
procedure Outlines the current shape using the pen colour and width specified
with the setstrokecolor and setlinewidth command. The shape is not
filled. To fill and outline the shape, use strokeandfill instead. If you only
want to fill the shape, use fill.
Name: Type: Description: