6.0

ManualsBrandsObjectif Lune ManualsApplicationsPlanetPress Talk

Table Of Contents

Draw

GetYellow

function Returns the value of the Yellow component of a color array.

Put

procedure Assigns a value to an element of an array.

Name: Type: Description:

Arc

procedure Draws an arc in a counter-clockwise direction. If there is a current point

set, the command draws a straight line from the current point to the

start point of the arc. Whether or not a current point is set when the

command executes, after execution the current point is the end point of

the arc.

ArcN

procedure Draws an arc in a clockwise direction. If there is a current point set, the

command draws a straight line from the current point to the start point

of the arc. Whether or not a current point is set when the command

executes, after execution the current point is the end point of the arc.

ClosePath

procedure Closes any open path and completes the current shape, if need be, by

drawing a line from the last point in the shape to the starting point. This

ensures the shape is closed, thus enabling filling to take place if

specified. Only closed shapes can be filled.

CRLF

procedure Moves the current point by simulating a carriage return/line feed

combination. The horizontal position is reset to the value of the current

left margin, while the vertical position is offset by the leading value

specified.

CurveTo

RCurveTo

procedure Creates a Bezier curve. Bezier curves are shapes defined using 4 points:

the starting and ending points are physical positioning points while the

second and third points are control points on the curve. In PlanetPress

Talk, the starting point is implicit and automatically set to the current

cursor position. The first control point defines the direction the curve

takes when moving from the starting point, and before shifting to the

second control point, which defines a second curve before reaching the

ending point.

Fill

procedure Fills the current closed shape, using the colour specified with the

setfillcolor command. Only the inside of the shape is filled, not its

outline. To fill and outline the shape, use strokeandfill command

instead. If you only want to outline the shape, use stroke. Only closed

shapes can be filled.

LineTo

RLineTo

procedure Draws a line starting from the current point up to the specified

coordinates.

Name: Type: Description: