6.0

129
Syntax
rectangle( x, y, x1, y1, filled, stroked )
Arguments
x, y — Measure values representing the horizontal/vertical position, in inches, of the starting point.
x1, y1 — Measure values representing the horizontal/vertical position, in inches, of the bottom right
corner of the rectangle.
filled — Boolean value specifying whether the shape should be filled using the colour specified with the
setfillcolor command.
stroked — Boolean value specifying whether the shape should be outlined using the colour specified with
the setstrokecolor command.
Code Sample Example
This example draws a yellow rectangle with a black border.
Example
setstrokecolor([0,0,0,100])
setfillcolor([0,0,50,0])
rectangle(0,0,3,3,true,true)
RectFill (procedure)
Creates and draws a filled rectangle shape. The colour used to fill the shape can be specified using the
setfillcolor command.
Syntax
rectfill( x, y, width, height )
Arguments
x, y — Measure values representing the horizontal/vertical position, in inches, of the starting point.
width, height — Measure values representing the width/height, in inches, of the rectangle shape.
Code Sample Example
This example draws two identical rectangles.
Note: To draw a rectangle that is both stroked and filled, use rectstroke() and rectfill() in succession, or
rectfillstroke().