7.x
Table Of Contents
- Copyright Information
- Table of Content
- Overview
- Capturing Data
- Sample Data File
- Spool File
- Capture Sample Data for a Document You Install on a Printer
- Capture Sample Data for a Document You Install in your PlanetPress Suite Work...
- Capture Sample Data in Windows NT
- Capture Sample Data in Windows 2000/Server 2003/XP
- Capture Sample Data in Windows Host Using a Novell Print Server
- Capture Sample Data in UNIX (Solaris)
- Capture Sample Data using an AS/400 Systems
- Capture Sample Data From a Serial Port
- Creating Triggers
- Trigger
- Trigger Syntax
- Techniques for Inserting Triggers
- Implement a Trigger under Novell 3.x
- Implement a Trigger under Novell 4.x and 5.x with NDS or Bindery Printers
- Implement a Trigger under Windows with TCP/IP
- Implement a Trigger under BSD Printing Systems (BSDi, FreeBSD, Linux)
- Implement a Trigger under UNIX System V (Solaris)
- Implement a Trigger and Configure an AIX 4.3 Printer
- Implement a Trigger under VMS
- Implement a Trigger with AS/400 Systems
- Prepare SAP Device Type for PlanetPress Design
- Implement a Trigger under HP 3000
- Special Printer Requirements
- ASCII Conversion Table
- CL Program for AS/400 Systems
- Index
2. In the Name box, enter a name for the connection and click OK.
The Connect To dialog box appears.
3. Select COM 1 or COM 2 and click OK. If you need to determine which COM port the printer uses, open the Con-
trol Panel, then open Modems and click Diagnostics. In most cases you select COM2. The remaining steps of this
procedure assume you selected COM2.
The COM2 Properties dialog box appears.
Capturing Data
©2014 Objectif Lune Inc - 17 -