7.4

The On Error Tab is common to all tasks. Details can be found on Task Properties Dialog.
If storing the message or ID, if they are store in a jobinfo they will be available in any error handling process where errors are
being forwarded. In all cases, if your process continues after the error, the contents of the variables selected in this window
will be available for the rest of your process, or whenever they are overwritten.
Common Errors
Though some error messages are specific to a task in particular, others may apply to any and all tasks because they are
related more to the system than to PlanetPress itself. Some examples would be W3813, W3830, W3991, W4005. These cor-
respond to issues such as not having any space to write files, permission errors on folders or files, etc.
Serial Input
Serial input tasks receive files sent to a serial port on the computer running PlanetPress Suite Workflow Tools. All the Serial
input tasks in aPlanetPress Suite Workflow Tools configuration share the same general properties, which are configured
through user options (see Serial Input Service User Options). Only the properties set in the Other and Error tabs are specific
to individual tasks.
Input
This task does not poll an input, it sits there and waits for a job file to be sent through the Serial connection.
Processing
When the job is received through the Serial connection, it is saved as a job file. No further processing is done on the file.
Output
The task outputs the job file as is, with no evaluation or modification.
General Tab
l Since Serial input tasks have no specific task configurable properties, this section contains no property information.
"Other" Tab
l Job Information group
l Information elements:indicates what job infos are automatically created by the input task.
l Add lines before first data page:Using the arrows keys you can add any job information directly at the
beginning of your data file.
l Backup input files:Check this to save a copy of each data file that is captured by your input. These files are saved in
the PlanetPress Suite Workflow Tools working folders under the "Backup"folder.
l Backup filename:Enter the filename that you wish the input data file backup to be saved under.
l Delete Existing Metadata:Check to remove any metadata from memory. This option is disabled on initial input
tasks, and is checked by default on secondary input tasks.
Job Information definitions
l %1 - Source file name:Contains the name of the job file as specified by the software that sent the job.
On Error Tab
The On Error Tab is common to all tasks. Details can be found on Task Properties Dialog.