7.2
Table Of Contents
- Copyright Information
- Table of Content
- Overview
- Capturing Data
- Sample Data File
- Spool File
- Capture Sample Data for a Document You Install on a Printer
- Capture Sample Data for a Document You Install in your PlanetPress Suite Work...
- Capture Sample Data in Windows NT
- Capture Sample Data in Windows 2000/Server 2003/XP
- Capture Sample Data in Windows Host Using a Novell Print Server
- Capture Sample Data in UNIX (Solaris)
- Capture Sample Data using an AS/400 Systems
- Capture Sample Data From a Serial Port
- Creating Triggers
- Trigger
- Trigger Syntax
- Techniques for Inserting Triggers
- Implement a Trigger under Novell 3.x
- Implement a Trigger under Novell 4.x and 5.x with NDS or Bindery Printers
- Implement a Trigger under Windows with TCP/IP
- Implement a Trigger under BSD Printing Systems (BSDi, FreeBSD, Linux)
- Implement a Trigger under UNIX System V (Solaris)
- Implement a Trigger and Configure an AIX 4.3 Printer
- Implement a Trigger under VMS
- Implement a Trigger with AS/400 Systems
- Prepare SAP Device Type for PlanetPress Design
- Implement a Trigger under HP 3000
- Special Printer Requirements
- ASCII Conversion Table
- CL Program for AS/400 Systems
- Index
mailing:\
:sd=/var/spool/lpd/mailing:\
:mx#0:\
:sh:\
:lp=/dev/lp1:
If you want to send the print job to a remote LPD server, use rm= to specify the remote print server, and rp= to specify the
remote queue name. You specify the remote print server in the rm field using either the IP address or host name. For exam-
ple:
mailing:\
:sd=/var/spool/lpd/mailing:\
:mx#0:\
:sh:\
:rm=192.168.100.147:\
:rp=default:
To create a spool directory by hand:
l Use the following command, replacing mailing with the name you want to use for the spool directory.
mkdir /var/spool/lpd/mailing
Implement a Trigger under UNIX System V (Solaris)
Refer to "Capture Sample Data in UNIX (Solaris)" (page 13) to create a print queue for UNIX and capture data.
Implement a Trigger and Configure an AIX 4.3 Printer
Add a Physical or Virtual Printer
To add a physical or virtual printer in series:
1. Log in as dyadm.
2. Execute SmitPrinter.
3. Select Print Spooling.
Creating Triggers
©2014 Objectif Lune Inc - 38 -