7.2
Table Of Contents
- Copyright Information
- Table of Content
- Overview
- Capturing Data
- Sample Data File
- Spool File
- Capture Sample Data for a Document You Install on a Printer
- Capture Sample Data for a Document You Install in your PlanetPress Suite Work...
- Capture Sample Data in Windows NT
- Capture Sample Data in Windows 2000/Server 2003/XP
- Capture Sample Data in Windows Host Using a Novell Print Server
- Capture Sample Data in UNIX (Solaris)
- Capture Sample Data using an AS/400 Systems
- Capture Sample Data From a Serial Port
- Creating Triggers
- Trigger
- Trigger Syntax
- Techniques for Inserting Triggers
- Implement a Trigger under Novell 3.x
- Implement a Trigger under Novell 4.x and 5.x with NDS or Bindery Printers
- Implement a Trigger under Windows with TCP/IP
- Implement a Trigger under BSD Printing Systems (BSDi, FreeBSD, Linux)
- Implement a Trigger under UNIX System V (Solaris)
- Implement a Trigger and Configure an AIX 4.3 Printer
- Implement a Trigger under VMS
- Implement a Trigger with AS/400 Systems
- Prepare SAP Device Type for PlanetPress Design
- Implement a Trigger under HP 3000
- Special Printer Requirements
- ASCII Conversion Table
- CL Program for AS/400 Systems
- Index
4. Adjust the COM2 Properties and click OK.
A HyperTerminal window for this connection appears.
5. In the menu for the HyperTerminal window, choose Transfer | CaptureText.
The Capture Text dialog box appears.
6. The file name that appears in this dialog box is Capture.txt. If this file does not exist, you will need to create it
(this is the text file that will be used as the capture file).
7. Click Start.
8. Send the input data to the printerusing the procedure you would usually use to print the data.
9. When the print command completes, return to the HyperTerminal window for this connection and choose Trans-
fer | Capture
Capturing Data
©2014 Objectif Lune Inc - 18 -