6.0
Table Of Contents
- Capturing Data
- Overview
- Key Concepts
- Detailed Directions
- Capture Sample Data for a Document You Install on a Printer
- Capture Sample Data for a Document You Install in PlanetPress Watch
- Capture Sample Data in Windows NT
- Capture Sample Data in Windows 2000/Server 2003/XP
- Capture Sample Data in Windows Host Using a Novell Print Server
- Capture Sample Data in UNIX (Solaris)
- Capture Sample Data using an AS/400 Systems
- Capture Sample Data From a Serial Port
- Creating Triggers
- Overview
- Key Concepts
- Detailed Directions
- Implement a Trigger under Novell 3.x
- Implement a Trigger under Novell 4.x and 5.x with NDS or Bindery Printers
- Implement a Trigger under Windows NT 4.0 with TCP/IP
- Implement a Trigger under BSD Printing Systems (BSDi, FreeBSD, Linux)
- Implement a Trigger under UNIX System V (Solaris)
- Implement a Trigger and Configure an AIX 4.3 Printer
- Implement a Trigger under VMS
- Implement a Trigger with AS/400 Systems
- Prepare SAP Device Type for PlanetPress Design
- Implement a Trigger under HP 3000
- Special Printer Requirements
- ASCII Conversion Table
- CL Program for AS/400 Systems
- Index
86
Creating Triggers
2
9. Click the left-pointing checkmark in the toolbar to return to the previous window.
10. Click Formats and create a new format.
11. Enter the name ZLETTER again.
12. In the Spool Administration: Format Type (Change) window, assign the LETTER page format created
in step 4. to the new format ZLETTER.
13. Click the left-pointing checkmark in the toolbar to return to the previous window.
14. Click Device types to display the list of device types.
15. Select For dev. types and Copy device type from the Utilities menu.
16. Copy device type ASCIIPRI to ZASCIIxx (where xx is a number). Verify the Use references box is cleared.
17. Click the left-pointing checkmark in the toolbar to return to the previous window.