6.0
Table Of Contents
- Capturing Data
- Overview
- Key Concepts
- Detailed Directions
- Capture Sample Data for a Document You Install on a Printer
- Capture Sample Data for a Document You Install in PlanetPress Watch
- Capture Sample Data in Windows NT
- Capture Sample Data in Windows 2000/Server 2003/XP
- Capture Sample Data in Windows Host Using a Novell Print Server
- Capture Sample Data in UNIX (Solaris)
- Capture Sample Data using an AS/400 Systems
- Capture Sample Data From a Serial Port
- Creating Triggers
- Overview
- Key Concepts
- Detailed Directions
- Implement a Trigger under Novell 3.x
- Implement a Trigger under Novell 4.x and 5.x with NDS or Bindery Printers
- Implement a Trigger under Windows NT 4.0 with TCP/IP
- Implement a Trigger under BSD Printing Systems (BSDi, FreeBSD, Linux)
- Implement a Trigger under UNIX System V (Solaris)
- Implement a Trigger and Configure an AIX 4.3 Printer
- Implement a Trigger under VMS
- Implement a Trigger with AS/400 Systems
- Prepare SAP Device Type for PlanetPress Design
- Implement a Trigger under HP 3000
- Special Printer Requirements
- ASCII Conversion Table
- CL Program for AS/400 Systems
- Index
Detailed Directions
85
Prepare SAP Device Type for PlanetPress Design
PlanetPress Design is a PC-based software that merges output data from the source system. In order for
PlanetPress Design to work with SAP, you must make changes to the spool device type.
To modify the spool device type in SAP:
1. Run SPAD and select Full Administration.
The Spool Administration: Initial Screen window appears.
2. Click the red pencil icon to change to edit mode.
3. In the Device types section, click Page formats.
4. In the Page Formats window, select LETTER or another format from the list.
5. Select Copy from to copy LETTER to a new format.
6. Enter ZLETTER.
7. Select both Portrait and Landscape orientations.
8. Assign the appropriate width and length values to the paper size.