6.0
Table Of Contents
- Capturing Data
- Overview
- Key Concepts
- Detailed Directions
- Capture Sample Data for a Document You Install on a Printer
- Capture Sample Data for a Document You Install in PlanetPress Watch
- Capture Sample Data in Windows NT
- Capture Sample Data in Windows 2000/Server 2003/XP
- Capture Sample Data in Windows Host Using a Novell Print Server
- Capture Sample Data in UNIX (Solaris)
- Capture Sample Data using an AS/400 Systems
- Capture Sample Data From a Serial Port
- Creating Triggers
- Overview
- Key Concepts
- Detailed Directions
- Implement a Trigger under Novell 3.x
- Implement a Trigger under Novell 4.x and 5.x with NDS or Bindery Printers
- Implement a Trigger under Windows NT 4.0 with TCP/IP
- Implement a Trigger under BSD Printing Systems (BSDi, FreeBSD, Linux)
- Implement a Trigger under UNIX System V (Solaris)
- Implement a Trigger and Configure an AIX 4.3 Printer
- Implement a Trigger under VMS
- Implement a Trigger with AS/400 Systems
- Prepare SAP Device Type for PlanetPress Design
- Implement a Trigger under HP 3000
- Special Printer Requirements
- ASCII Conversion Table
- CL Program for AS/400 Systems
- Index
78
Creating Triggers
2
The following window appears.
2. Press F10 to display additional parameters.
3. Enter the name of the workstation customizing object that you want to create, and the library name
for the customizing object (the one previously changed).
4. In the Additional Parameters section, enter the following:
Source file: Enter the name of the source QTXTSRC.
Library: Enter the name of the library containing the source file.
Replace object: Enter *YES or *NO to indicate whether or not this name should replace an object with
the same name.