6.0
Table Of Contents
- Capturing Data
- Overview
- Key Concepts
- Detailed Directions
- Capture Sample Data for a Document You Install on a Printer
- Capture Sample Data for a Document You Install in PlanetPress Watch
- Capture Sample Data in Windows NT
- Capture Sample Data in Windows 2000/Server 2003/XP
- Capture Sample Data in Windows Host Using a Novell Print Server
- Capture Sample Data in UNIX (Solaris)
- Capture Sample Data using an AS/400 Systems
- Capture Sample Data From a Serial Port
- Creating Triggers
- Overview
- Key Concepts
- Detailed Directions
- Implement a Trigger under Novell 3.x
- Implement a Trigger under Novell 4.x and 5.x with NDS or Bindery Printers
- Implement a Trigger under Windows NT 4.0 with TCP/IP
- Implement a Trigger under BSD Printing Systems (BSDi, FreeBSD, Linux)
- Implement a Trigger under UNIX System V (Solaris)
- Implement a Trigger and Configure an AIX 4.3 Printer
- Implement a Trigger under VMS
- Implement a Trigger with AS/400 Systems
- Prepare SAP Device Type for PlanetPress Design
- Implement a Trigger under HP 3000
- Special Printer Requirements
- ASCII Conversion Table
- CL Program for AS/400 Systems
- Index
Detailed Directions
51
3. Enter the following text inside your trigger file. It assumes your document resides on the hard drive of
the printer. In this example, MYDOCUMENT is the name of the document. This name appears on the
confirmation sheet that prints when you install the document on the printer's hard drive.
%!PS-Adobe
(MYDOCUMENT) run MYDOCUMENT
4. Save your script file and exit the editor (press ESCAPE, then enter :wq).
Submit a Print Request Using a Trigger
To submit a print request using a trigger:
• Issue the following command to run the script file and launch the printing process:
lp -d myscriptfile data_filename
Implement a Trigger and Configure an AIX 4.3 Printer
Add a Physical or Virtual Printer
To add a physical or virtual printer in series:
1. Log in as dyadm.
2. Execute Smit Printer.