6.0
Table Of Contents
- Capturing Data
- Overview
- Key Concepts
- Detailed Directions
- Capture Sample Data for a Document You Install on a Printer
- Capture Sample Data for a Document You Install in PlanetPress Watch
- Capture Sample Data in Windows NT
- Capture Sample Data in Windows 2000/Server 2003/XP
- Capture Sample Data in Windows Host Using a Novell Print Server
- Capture Sample Data in UNIX (Solaris)
- Capture Sample Data using an AS/400 Systems
- Capture Sample Data From a Serial Port
- Creating Triggers
- Overview
- Key Concepts
- Detailed Directions
- Implement a Trigger under Novell 3.x
- Implement a Trigger under Novell 4.x and 5.x with NDS or Bindery Printers
- Implement a Trigger under Windows NT 4.0 with TCP/IP
- Implement a Trigger under BSD Printing Systems (BSDi, FreeBSD, Linux)
- Implement a Trigger under UNIX System V (Solaris)
- Implement a Trigger and Configure an AIX 4.3 Printer
- Implement a Trigger under VMS
- Implement a Trigger with AS/400 Systems
- Prepare SAP Device Type for PlanetPress Design
- Implement a Trigger under HP 3000
- Special Printer Requirements
- ASCII Conversion Table
- CL Program for AS/400 Systems
- Index
Detailed Directions
39
Note that certain versions of Windows have Generic Text pilots that can cause a well known problem:
text aligned vertically instead of horizontally. To solve this problem, access the printer's properties. In
the Fonts tab, add a space in every Font codes section.
Implement a Trigger under Windows NT 4.0 with TCP/IP
Use this procedure when you print from a Windows NT 4.0 application or from Windows NT 4.0 itself. First
determine the network protocol (TCP/IP, NetBios, or IPX/SPX).
Use Microsoft TCP/IP Printing
To set the network protocol:
1. In the Windows Start menu, choose Settings | Control Panel.
2. In the Control Panel, double-click Network.