6.0
Table Of Contents
- Capturing Data
- Overview
- Key Concepts
- Detailed Directions
- Capture Sample Data for a Document You Install on a Printer
- Capture Sample Data for a Document You Install in PlanetPress Watch
- Capture Sample Data in Windows NT
- Capture Sample Data in Windows 2000/Server 2003/XP
- Capture Sample Data in Windows Host Using a Novell Print Server
- Capture Sample Data in UNIX (Solaris)
- Capture Sample Data using an AS/400 Systems
- Capture Sample Data From a Serial Port
- Creating Triggers
- Overview
- Key Concepts
- Detailed Directions
- Implement a Trigger under Novell 3.x
- Implement a Trigger under Novell 4.x and 5.x with NDS or Bindery Printers
- Implement a Trigger under Windows NT 4.0 with TCP/IP
- Implement a Trigger under BSD Printing Systems (BSDi, FreeBSD, Linux)
- Implement a Trigger under UNIX System V (Solaris)
- Implement a Trigger and Configure an AIX 4.3 Printer
- Implement a Trigger under VMS
- Implement a Trigger with AS/400 Systems
- Prepare SAP Device Type for PlanetPress Design
- Implement a Trigger under HP 3000
- Special Printer Requirements
- ASCII Conversion Table
- CL Program for AS/400 Systems
- Index
Detailed Directions
33
• In the Control sequence box, enter <ESC>%-12345X<CR><LF>
10. Click OK.
CREATE THE SECOND FUNCTION
11. Return to the Create New Function dialog box.
12. In the Create New Function dialog box, enter the following information:
• In the Function name box, enter Force Postscript.
• In the Control sequence box, enter <ESC>%-12345X@PJL enter language =
PostScript<CR><LF>
13. Click OK.
CREATE THE THIRD FUNCTION
14. Return to the Create New Function dialog box.
15. In the Create New Function dialog box, enter the trigger information. For example, if the name of the
document you want to execute is MAILING, and it exists on the hard drive of the printer, you would
enter the following:
• In the Function name box, enter call mailing.