6.0
Table Of Contents
- Capturing Data
- Overview
- Key Concepts
- Detailed Directions
- Capture Sample Data for a Document You Install on a Printer
- Capture Sample Data for a Document You Install in PlanetPress Watch
- Capture Sample Data in Windows NT
- Capture Sample Data in Windows 2000/Server 2003/XP
- Capture Sample Data in Windows Host Using a Novell Print Server
- Capture Sample Data in UNIX (Solaris)
- Capture Sample Data using an AS/400 Systems
- Capture Sample Data From a Serial Port
- Creating Triggers
- Overview
- Key Concepts
- Detailed Directions
- Implement a Trigger under Novell 3.x
- Implement a Trigger under Novell 4.x and 5.x with NDS or Bindery Printers
- Implement a Trigger under Windows NT 4.0 with TCP/IP
- Implement a Trigger under BSD Printing Systems (BSDi, FreeBSD, Linux)
- Implement a Trigger under UNIX System V (Solaris)
- Implement a Trigger and Configure an AIX 4.3 Printer
- Implement a Trigger under VMS
- Implement a Trigger with AS/400 Systems
- Prepare SAP Device Type for PlanetPress Design
- Implement a Trigger under HP 3000
- Special Printer Requirements
- ASCII Conversion Table
- CL Program for AS/400 Systems
- Index
24
Creating Triggers
2
• In the Escape Sequence field, enter the following sequence: (MAILING) run MAILING<CR><LF>
15. Press ESCAPE. In the Save Changes dialog box, select Yes and press ENTER to save the changes.
16. Press ESCAPE again. In the Edit Device Options dialog box, select Device Modes.
The Mailing Modes dialog box appears.
17. In the New Mode Name dialog box, press INSERT and enter Call Mailing.
18. In the Call Mailing Functions dialog box, press INSERT.