7.5

l Image quality: Select the same image quality chosen in the PlanetPress Design documents that reference the image
files you are sending. In PlanetPress Design, this setting is included in the document’s resource options.
l Image compression level: Select the level at which you want images to be compressed. Values can range from 1
(compress up to 1% of the image’s original size) to 100 (do not compress). For example if you set this box to 75, the
Image Downloader compresses all images by 75% when it converts those image to PostScript. The default com-
pression level is 70%.
l Send to Virtual Drive of: Select the computers and/or printers to which the images are to be sent.
l Refresh: Click to prompt PlanetPress Suite Workflow Tools to look again for available printers and computers.
l Hard disk name and path: You may enter the name and path of the hard disk to which you want to send the
images. Needless to say that this option is used if the device to which you are sending the images has multiple hard
drives.
l Print confirmation page: Select to print a confirmation page on each one of the selected printers after an image
has been successfully received.
On Error Tab
The On Error Tab is common to all tasks. Details can be found on Task Properties Dialog.
If storing the message or ID, if they are store in a jobinfo they will be available in any error handling process where errors are
being forwarded. In all cases, if your process continues after the error, the contents of the variables selected in this window
will be available for the rest of your process, or whenever they are overwritten.
Common Errors
Though some error messages are specific to a task in particular, others may apply to any and all tasks because they are
related more to the system than to PlanetPress itself. Some examples would be W3813, W3830, W3991, W4005. These cor-
respond to issues such as not having any space to write files, permission errors on folders or files, etc.
Comments Tab
The Comments tab, added in PlanetPress Suite 7.5, is common to all tasks. It contains a single text area (Task
comments)that lets you write comments about the task. These comments are saved when the dialog is closed with the
OKbutton, and are displayed in The Task Comments Pane.
Search and Replace
Search and Replace action tasks are used to locate and replace strings of data within the job file and to replace them with other
strings of data. Note that this action task cannot be used with binary files.
For more advanced search and replace functionality, you can also see Advanced Search and Replace.
Input
Any text-based file can be used in this task, even formats that are not directly compatible with PlanetPress. As long as the text
is visible in a text-based editor (such as Notepad), it is readable and supported by this task.
Processing
The appropriate changes are made to the data file (replacing text).
Output
The modified data file is output from this task. Metadata is not modified in any way if it is present.
Search and Replace action task properties are as follows:
General Tab