7.3

LPD tasks are configured primarily through user options (see "LPD Input Preferences" (page 78)). The only LDP information
you enter in each LPD task is the queue name.
When you set up the printer queue on the remote computer, you must specify the IP address of the host computer running
PlanetPress Suite Workflow Tools and the name of the remote printer queue. The queue name entered on the remote com-
puter side must match the queue name set in the LPD input task.
LDP input task property is as follows:
General tab
l LPD queue name: Enter the queue name specified in the printer queue on the remote computer or computers.
"Other" Tab
l Job Information group
l Information elements:indicates what job infos are automatically created by the input task.
l Add lines before first data page:Using the arrows keys you can add any job information directly at the
beginning of your data file.
l Backup input files:Check this to save a copy of each data file that is captured by your input. These files are saved in
the PlanetPress Suite Workflow Tools working folders under the "Backup"folder.
l Backup filename:Enter the filename that you wish the input data file backup to be saved under.
l Delete Existing Metadata:Check to remove any metadata from memory. This option is disabled on initial input
tasks, and is checked by default on secondary input tasks.
Job Information definitions
l %1- User name:Contains the user name of the user who sent the job to the printer, or the user un which a soft-
ware sending the job was logged in under.
l %2 - Host computer:Contains the name of the computer from which the job was sent.
l %3 - Job name:Contains the name of the job as specified by the software that sent the job.
l %4 - Source file name:Contains the name of the job file as specified by the software that sent the job.
l %5 - Sender's IPaddress:Contains the IPadress from which the job was sent.
On Error Tab
The On Error Tab is common to all tasks. Details can be found on "Task Properties Dialog" (page 54).
Serial Input
Serial input tasks receive files sent to a serial port on the computer running PlanetPress Suite Workflow Tools. All the Serial
input tasks in aPlanetPress Suite Workflow Tools configuration share the same general properties, which are configured
through user options (see "Serial Input Service User Options" (page 78)). Only the properties set in the Other and Error tabs
are specific to individual tasks.
General Tab
l Since Serial input tasks have no specific task configurable properties, this section contains no property information.
"Other" Tab
l Job Information group
l Information elements:indicates what job infos are automatically created by the input task.
l Add lines before first data page:Using the arrows keys you can add any job information directly at the
beginning of your data file.
©2010 Objectif Lune Inc - 116 -