7.2

security for Capture files and documents as you would the rest of your sensitive information. In most cases, the procedures
in place are enough for this purpose.
Anoto penDirector
The Anoto penDirector is a software driver provided as a download by Objectif Lune Inc. The penDirector creates a bridge
between the Anoto Digital Pen and a PlanetPress Capture workflow in PlanetPress Production.
In order to use penDirector, it needs to be downloaded from the Objectif Lune website, on this page. This sofware must be
installed after PlanetPress Suite. The setup will install a pre-configured version of the penDirector which can be immediately
used with PlanetPress Capture.
The communication between penDirector and PlanetPress Production is either through a folder transfer or HTTPPost com-
munication.
To configure this communication:
1. Open the penDirector setup by right-clicking on its icon in the Windows System Tray, and selecting penDispatcher.
2. Double-click on the PlanetPress Capture entry.
3. Change the PGCStorage folder or PGCPOST URLsettings to your liking.
4. Click OK, then OKagain.
The PGCPOSTURLshould correspond to your server name or IP, Port and the HTTPAction task of your HTTPInput, if that is
what you are using.
"Anoto" and the Anoto logotype are trademarks owned by Anoto AB. PLANETPRESS CAP-
TURE is based on Anoto Digital Pen and Paper Technology, which is covered by over 200
patents worldwide, including but not limited to US6663008, US7172131, US7248250,
US7281668, JP3872498, JP3842283, CN1595440, SE517445, RU2256225, and AU773011.
Capture Fields Generator Action Task
The Capture Fields Generator Action Task is used to generate Capture patterns in your job, which will then be printed for use
with an Anoto Digital Pen. It also interacts with the Capture database and does some operations.
Input
The Capture Field Generator Action Task expects to receive a regular data file that corresponds to the Capture-Ready doc-
ument that uses it, along with Metadata generated using the same data file and document. This means that this task must be
preceded by at least the Create Metadata task.
This metadata must also be correctly separated at the Documents level, either in the Capture-Ready document's properties or
through the Metadata Level Creator.
You may also use a Metadata Sequencer in order to split the job into multiple parts. This both creates multiple smaller outputs,
as well as multiple smaller PDFs in the Capture Database. While it is not recommended to separate each document on its own
as it removes all optimization and makes the database much larger, you may split into document batches such as 250, 1000 or
2500 documents.
If using the Metadata Sequencer it is generally recommended to place the Sequencer and the Capture Field Generator tasks
within a branch and, within the Capture Field Generator's On Error properties tab, to set it to stop the branch if any errors
PlanetPress Capture
©2010 Objectif Lune Inc - 197 -