7.1

Lune Printer Driver being downloaded to the connecting host.
Printer Properties setup
The PlanetPress Suite Workflow Tools WinQueue Input task can be configured to set a Windows printer queue using Objectif
Lune Printer Driver (PS) to produce one of 3 different types of datafiles: EMF, PostScript, or PDF. Note that PlanetPress Watch
can only produce EMF or PostScript files.
Possible printer properties settings, along with the datafile type it will produce:
Spool Print Jobs in EMF Format:
l This will create an EMF datafile.
l This format is usally reserved for use with the Windows Print Converter action plugin.
l This format can be obtained using PlanetPress Watch, Office or Production.
Spool Print Jobs in RAW Format:
l This will create a PostScript datafile when the option Create Composed Document Stream (with Medatada) is
unchecked.
l This format can be obtained using PlanetPress Watch, Office or Production.
l This will create a PDF datafile when the option Create Composed Document Stream (with Medatada) is
checked.
l This format can be obtained using PlanetPress Office or PlanetPress Production.
By default, the Create Composed Document Stream option is:
l Checked if the incoming stream has been produced with the Objectif Lune Printer Driver.
l Unchecked if the incoming stream comes from some other PostScript Driver.
l Grayed out and unchecked if the incoming stream is not PostScript.
Data Capture from the PlanetPress Suite Workflow Tools
Once a shared Windows printer queue using Objectif Lune Printer Driver (PS) is installed on both the server and the client
sides, data capture can be achieved the same way as with any other Windows printer queues.
Data Capture from the PlanetPress Suite Workflow Tools:
1. Open your PlanetPress Suite Workflow Tools Configuration program.
2. Insert a new process.
3. Select WinQueue Input from the Plugin Bar and insert it in the new process.
4. In the WinQueue Input properties, select a Windows print queue using the Objectif Lune Printer Driver (PS) from
the drop-down list.
5. Click OK.
6. Send the configuration and start your PlanetPress Suite Workflow Tools service.
7. Start the windows application from which you want to capture data.
8. Open your selected document.
9. Click File | Print.
10. Choose the same Windows print queue as in step 4.
Note that steps 6-8 can be performed at any time, even if PlanetPress Watch/Office/Production is not yet started. This is
Printer Queues and Documents
©2010 Objectif Lune Inc - 186 -