7.1

About PlanetPress Fax
What is PlanetPress Fax?
PlanetPress Fax is a service that can be used to output data and documents via a faxing software, such as Windows Fax (avail-
able with Windows 2000, XP, and Microsoft Windows Server™ 2003) or Symantec WinFax PRO, as well as via a faxing server,
such as Captaris RightFax. Note that it is these applications that do the actual faxing.
l Windows 2000: PlanetPress Fax output tasks set to use Windows Fax under Windows 2000 may fail when no one is
logged on the system running PlanetPress Fax.
l Windows XP: Windows Fax may not work properly after the Windows XP Service Pack 2 (SP2) has been installed (refer
to Microsoft Customer service for more information on this issue). Also note that Windows Fax may take as much as
three times more time to send faxes under Windows XP.
PlanetPress Fax can be installed on any computer on your network and process all requests coming from tasks performed by
PlanetPress Suite Workflow Tools on other workstations. You may choose to run it on every computer where PlanetPress Suite
Workflow Tools is running, but you may also choose to run it on computers more or less dedicated to PlanetPress Fax.
Since the faxing program must always be running and ready to receive requests from PlanetPress Suite Workflow Tools, it
should be included in the Windows Startup Group.
PlanetPress Fax can associate a different fax number with each page it sends via the faxing software. For this to happen, two
things are required: each record must have a fax number specified in the job file and that fax number must be tagged as such
in PlanetPress Design (in the PlanetPress Design User Guide, refer to the section documenting Data Selections, which
includes explanations on the available PlanetPress Fax options). When the data and the document are merged, the fax number
associated with each record becomes available to PlanetPress Fax that can then pass it on to the faxing software.
Note that the minimum time required to generate a PlanetPress Fax document is approximately 10 times longer on Windows
2000 than on Windows XP/2003.
PlanetPress Fax Output Task Properties
PlanetPress Fax output tasks are used to make request to PlanetPress Fax, which creates faxes and sends them to a faxing
program.
In addition to the job-specific PlanetPress Fax properties you configure in the task’s properties dialog box, there are con-
figurable options common to all PlanetPress Fax outputs processed by a given computer (see "PlanetPress Fax User Options"
(page 71)). Note that those options are specific to each PlanetPress Fax installation and that they are immediately applied.
PlanetPress Fax output task properties are as follows:
General tab
l Host: Select the IP address of the PlanetPress Fax host to which you want the request to be sent. The Fax con-
figuration is set in the PlanetPress Fax User Options on the target host.
l Refresh: Click to update the list of IP addresses displayed in the Host drop-down list box.
l Documents: Select a specific PlanetPress Design document if you want all the jobs to be faxed with that document.
You must select a document, passtroughs are not available.
l Add job information to the document: Select to add the available job info variables in the “header” of the gen-
erated output file.
l Run mode group
l Printer centric: Select to send the document along with the trigger and data to the component that generates
fax documents.
©2010 Objectif Lune Inc - 167 -