7.2

A checksum is added automatically.
QR Code
This barcode supports various data types and the maximum number of characters allowed is based on the selected barcode
mode:
l Numeric: Numeric characters up to a maximum of 7089 digits.
l Alphanumeric: Numeric and alphanumeric characters (limited to uppercase letters, spaces, and the following char-
acters: dollar ($), percent (%), star (*), plus (+), minus (-), period (.), slash (/), and semicolon (;) only) up to a max-
imum of 4296 characters. Note that lowercase characters within the data are automatically converted to uppercase. In
7.3 and higher, the semicolon (;), at sign (@) and comma (,) are accepted.
Bar width is set using millimeters and corresponds to the minimum barcode width.
Error correction may be set from Level 0 to Level 3.
Royal Mail
The following characters are valid for this barcode:
l Digits: 0 to 9.
l Upper case letters: A to Z.
A checksum is added automatically.
UPC
The UPCbarcode in PlanetPress Design supports multiple subtypes:
UPC-A
Standard UPC-A codes must contain exactly 12 characters (including the checksum character). The following characters are
valid for this barcode:
l Digits: 0 to 9.
Apart from the standard UPC-A code, two additional codes can also be used:
l UPC-A+2 (12 digits + 2 supplemental digits).
l UPC-A+5 (12 digits + 5 supplemental digits).
A checksum is added automatically.
UPC-E
Standard UPC-E codes must contain exactly 8 characters:
l Must start with the digit 0 (must be added if not included in data).
l Six variable digits
l One checksum digit (added automatically).
The following characters are valid for this barcode:
l Digits: 0 to 9.
Apart from the standard UPC-E code, two additional codes can also be used:
©2010 Objectif Lune Inc - 162 -