7.2

The FCC number must be followed by eight (8) digits. These are mandatory to specify the destination. Additional characters
may be used for the Customer Information Field. The number characters varies according to each FCC format:
l Format 11: No extra characters.
l Format 59: Up to 8 digits or 5 letters.
l Format 62: Up to 15 digits or 10 letters.
Compatible characters for the Customer Information Field include:
l Upper and lower case letters: a to z and A to Z.
l Digits: 0 to 9.
l Symbols: space and # (pound).
A checksum is automatically calculated.
Aztec
This barcode can be used to generate Normal, Compact or Full Aztec barcodes. This barcode supports the full ASCII character
set and its maximum data capacity depends on the selected barcode type:
l Normal barcode mode: Up to 3800 digits, or up to 3000 alphanumeric characters.
l Compact barcode mode: Up to 58 digits, or up to 47 alphanumeric characters.
l Full barcode mode: Up to 310 digits, or up to 250 alphanumeric characters.
Bar width is set using millimeters and corresponds to the minimum barcode width.
Error correction levels correspond to the percentage the symbol that includes error checking data. Note that level 0 provides
optimal error correction. Each barcode mode has its own value range (Normal mode values range from 0 to 99, Compact from
0 to 4; and Full from 0 to 32).
Codabar
This barcode must start with a Start character and end with a Stop character. Characters A, B, C and D can be used as Start
and Stop characters.
For the remaining barcode data, the following characters may be used:
l Digits: 0 to 9.
l Symbols: - (hyphen), $(dollar),: (colon), / (slash),. (period), + (plus).
A checksum is automatically calculated.
CodablockF
This 2D barcode can currently only be used in documents that will be printed using either the Optimized Postscript or Windows
Printing mode (printer centric mode will be added in a future release).
This barcode supports the full ASCII character set based on the 3 alphabets used in the Code128 barcode (see below). The
switch between alphabets is done automatically. Special characters in the A alphabet are called with their ASCII value using
the following syntax: ^nnn (such as ^010 for LineFeed).
A minimum of 3 characters is required in this barcode. The maximum string length for this barcode varies depending on the
control characters used in the code. Bar width is set using millimeters and corresponds to the minimum barcode width.
©2010 Objectif Lune Inc - 153 -