2021.1

only once at the beginning of each job.
l Automation Property: The current value of a Document-level property set in the
Preprocessor step (see "Steps" on page255).
l Extractor Property: The value of an internal extractor variable:
l Counter: The value of the current counter iteration in a Repeat step.
l Vertical Position: The current vertical position on the page, either in Measure
(PDF) or Line (Text and CSV).
Condition
The Condition drop-down displays the cases in list form. Three buttons are available next to
the list:
l Add case: Click to add a new case to the step. It will be placed next to any existing
cases.
l Remove case: Delete the currently selected case.
l Order Cases: Under the Name column, select a case, then click one of the buttons on the
right (Delete, Move Up, Move Down) to delete or change the order of the cases in the list.
Operators
l Case conditions are made by comparison of the two operands, left and right, using a
specific Operator.
l is equal to: The two specified value are identical for the condition to be True.
l contains: The first specified value contains the second one for the condition to be
True.
l is less than: The first specified value is smaller, numerically, than the second value
for the condition to be True.
l is greater than: The first specified value is larger, numerically, than the second
value for the condition to be True.
l is empty: The first specified value is empty. With this operator, there is no second
value.
l Invert condition: Inverts the result of the condition. For instance, is empty becomes
is not empty.
Page 372