2021.1

EAN-13 Settings
EAN-13 barcodes are composed entirely of numerical data. The first 12 digits representing
country/economic area, manufacturer and product codes + 1 following checksum digit.
Note
To create dynamic barcodes, Metadata options must first have been set (see "Meta Data
options" on page1175).
Metadata fields are required to create the association between the dynamic data used in
the print run and the barcode.
Use the following options to configure the output Barcode settings:
l General group:
l Include in output checkbox: This determines whether of not this Additional Content
entry should be included in the output or not.
It is checked by default for all new entries.
This option allow for "libraries" of Additional Content to be created in Presets,
libraries from which you can pick and choose what entries you wish to have
included, at time of printing.
l Description edit box: An edit box for adding an optional Description to the
Additional Content entry.
l Position group:
l Orientation: Use the drop-down to select the orientation of the Barcode added to
the page.
l Output once per sheet: This option relates to Imposition printing (see Imposition),
also known as N-Up printing. Select this box to have the Barcode printed once per
sheet rather than once per document page.
Note
If Imposition options such as auto-positioning and scaling were selected,
these options won't apply to the Additional Content added to the physical N-
Up sheet.
Page 1223