2021.1

This option allow for "libraries" of Additional Content to be created in Presets,
libraries from which you can pick and choose what entries you wish to have
included, at time of printing.
l Description edit box: An edit box for adding an optional Description to the
Additional Content entry.
l Position group:
l Orientation: Use the drop-down to select the orientation of the Barcode added to
the page.
l Output once per sheet: This option relates to Imposition printing (see Imposition),
also known as N-Up printing. Select this box to have the Barcode printed once per
sheet rather than once per document page.
Note
If Imposition options such as auto-positioning and scaling were selected,
these options won't apply to the Additional Content added to the physical N-
Up sheet.
l Left: Enter the distance between the left margin of the page and the Barcode, in
either metric (cm/mm), inch (in) or point (pt) values.
l Bottom: Enter the distance between the bottom margin of the page and the
Barcode, in either metric (cm/mm), inch (in) or point (pt) values.
l GS1-128 Properties group:
l Height: Enter the Barcode height in either metric (cm/mm), inch (in) or point (pt)
values.
l Module Width: Specifies the width of the narrow bars. Changing this value to a
higher value will generally make the Barcode bigger.
l Check Digit marker: This character is used as a placeholder for the check digit,
which we be calculated at runtime. The character must be expressed in Hex.
l Group separator: This character is used to define group separation points. The
character must be expressed in Hex.
l Template: Specify an optional Barcode "template".
Examples:
Page 1221