2020.2

l
Description edit box: An edit box for adding an optional Description to the
Additional Content entry.
l
Position group:
l
Orientation: Use the drop-down to select the orientation of the Barcode added to
the page.
l
Output once per sheet: This option relates to Imposition printing (see Imposition),
also known as N-Up printing. Select this box to have the Barcode printed once per
sheet rather than once per document page.
Note
If Imposition options such as auto-positioning and scaling were selected,
these options won't apply to the Additional Content added to the physical N-
Up sheet.
l
Left: Enter the distance between the left margin of the page and the Barcode, in
either metric (cm/mm), inch (in) or point (pt) values.
l
Bottom: Enter the distance between the bottom margin of the page and the
Barcode, in either metric (cm/mm), inch (in) or point (pt) values.
QRCode Properties group:
l
Size by: Select size from the two options available:
l
By area: Connect will try to size the Barcode to fit the specified area by dynamically
changing the module width to the Size selection. The lower module width limit is
governed by the Minimum module width selection.
Enter the sizes in either metric (cm/mm), inch (in), pixel (px) or point (pt) values.
l
By module width: Connect will try to size the Barcode to the module width of the
characters. Large Barcode values will result in larger Barcode and vice versa.
Enter the Module widthin either metric (cm/mm), inch (in), pixel (px) or point (pt)
values.
l
Encoding: Define the encoding of the Barcode:
l
Auto: Automatically detect the data content and encodes using the most
appropriate method. This is the default option.
Page 1126