2020.2

l
With an external image, you can check the option Save with template. If this option is
checked, the file will be inserted in the Images folder on the Resources pane at the top
left.
If it isn't saved with the template, the image remains external. Note that external images
need to be available when the template is merged with a record set to generate output,
and that their location should be accessible from the machine on which the template's
output is produced. External images are updated (retrieved) at the time the output is
generated.
Sheet Configuration dialog
The Sheet Configuration dialog defines how different Print context sections output on different
Media (see "Media" on page488) and using different Master Pages (see "Master Pages" on
page485).
Note
Master Pages, Media and Duplex printing options can also be set in a Control Script (see
"Control Scripts" on page890 and "Control Script API" on page1379). This is especially
useful when you need identical sections with different settings.
General options
The first option defines Duplex printing, which also enables or disables the settings for the
Back side of each sheet.
If Duplex is enabled, you can also:
l
Check Omit empty back side for Last or Single sheet to reset a page to Simplex if it
has an empty back side (no content and no Master Page). Thus changing a Duplex job
into a Mixplex job may reduce volume printing costs as omitted back sides aren't included
in the number of printed pages. On the other hand, depending on the printer type it may
reduce the print speed as well.
l
Check Tumble to duplex pages like in a calendar. (On Portrait output, this would be
equivalent to short-edge duplex.)
l
Check Facing pages to have the margins of the section switch alternately, so that pages
are printed as if in a magazine or book.
The Media rotation setting rotates the Media 0, 90, 180, or -90 degrees.
Page 1004