2019.2

Tip
The saved file can be used to create a data mapping configuration.
The report
Using different data in the report requires changing the COTG Timesheet Report template
(see "Personalizing content" on page786).
Tip
The Designer can have one data mapping configuration and one template open at the
same time. Use the tabs at the top of the workspace to switch between the two. Click the
synchronize button on the Data Model pane to make sure that the Data Models are the
same in both.
You could also:
l Add text, images and other elements (see "Content elements" on page628)
l Change the layout (see "Styling and formatting" on page741)
l Change the "Media" on page508. If you have an image of the stationery the PDF will be
printed upon, add it to the Media to make designing the template little easier.
l Change the "Master Pages" on page505
l Add sections (see "Print context" on page482)
Once the template is ready, send it to Workflow (see "Sending files to Workflow" on page457)
and send the Workflow configuration to the server again.
Workflow configuration
To transform the project into a real solution, the Workflow configuration has to be adapted in
two important respects.
l The timing and manner of the production of forms will need to change. The Input task of
the cotg_ts_deploy_form process must be adapted to the actual input data. You will
also need to create an appropriate data mapping configuration for that data, which
Page 187