2019.2

This option allow for "libraries" of Additional Content to be created in Presets,
libraries from which you can pick and choose what entries you wish to have
included, at time of printing.
l
Description edit box: An edit box for adding an optional Description to the
Additional Content entry.
l
Position group:
l
Orientation: Use the drop-down to select the orientation of the Barcode added to
the page.
l
Output once per sheet: This option relates to Imposition printing (see Imposition),
also known as N-Up printing. Select this box to have the Barcode printed once per
sheet rather than once per document page.
Note
If Imposition options such as auto-positioning and scaling were selected,
these options won't apply to the Additional Content added to the physical N-
Up sheet.
l
Left: Enter the distance between the left margin of the page and the Barcode, in
either metric (cm/mm), inch (in) or point (pt) values.
l
Bottom: Enter the distance between the bottom margin of the page and the
Barcode, in either metric (cm/mm), inch (in) or point (pt) values.
l
Royal Mail 4-state Mailmark L Properties group:
l
Track height: The height of the small vertical centre bars, in metric (mm/cm). Value
must be between1.02 mm and 1.52 mm.
l
Full bar height: Height of the tallest vertical bars, in metric (mm/cm). Value must be
between4.22 mm and 5.84 mm.
The ascender and descender bar heights are automatically calculated based upon
the Full and Track bar heights.
l
Module width: Thickness of each bar in the Barcode, in metric (mm/cm). Value
must be between0.38 mm and 0.63 mm.
l
Module spacing: The spacing between each bar, in metric (mm/cm). Value must be
between0.3 mm and 0.7 mm.
Page 1248