2019.1

Note
Using viewport based units (vw, vh, vmin, vmax) in Print sections is not recommended. This may
cause differences between the preview in the Designer and the printed output.
For information about the different types of Boxes, see "Boxes" on page668.
Box tab
l
General group:
l
Width: Set the width of the boxin measure or percentage. When no unit is entered,
the default unit will be added to the value (see "Print Preferences" on page1012).
Equivalent to the CSS width property.
l
Height: Set the height of the boxin measure or percentage. When no unit is
entered, the default unit will be added to the value (see "Print Preferences" on
page1012). Equivalent to the CSS height property.
l
Angle: Set the rotation angle of the boxin clockwise degrees. Equivalent to the
CSS transform:rotate property.
l
Corner radius: Set the radius of rounded border cornersin measure or percentage.
Equivalent to the CSS border-radius property.
l
Display: Use the drop-down or type in the value for how to display the box.
Equivalent to the CSS display property.
l
Overflow: Use the drop-down or type in the value for how to handle overflow (text
that does not fit in the current size of the box). Equivalent to the overflow property.
l
Text wrap group:
l
Float: Use the drop-down or type in the value for how to float the box, if the box is
not in an absolute position (see Position, below). Equivalent to the CSS float
property.
l
Clear: Use the drop-down or type in the value for clearing pre-existing alignments.
Equivalent to the CSS clear property.
l
Positioning: Note that it depends on both the Context and the type of Box, which settings
are available. For information about the different types of Boxes, see "Boxes" on
page668.
Page 870