2019.1

page915.)
Note
In order to use the project, OL Connect Server and OL Connect Workflow must be installed on the
local machine.
The wizard lets you select the folder in which you want the solution to be installed.
In the selected folder, the Project Wizard will create two subfolders: Configurations and
Workspace.
The project's resource files are saved to the Configurations folder.
The Workspace folder is meant to be used when debugging or running the solution. It has an
In folder that may be used to monitor incoming data and an Out folder to write output files to.
The selected folder's path is saved to a global variable in the Workflow configuration (see
"Workflow configuration" on page178).
That variable is used in the settings of the Capture Folder and Send to Folder tasks.
Next, you have to select the desired output type: PDF, PCL or PostScript Level 3. Each of the
output types is available in two variants. The 'Stationery' variants will include the virtual
stationery (stored in the OL Connect template) in the output. This is a setting in the Output
Creation Preset (see "Print settings" on page177).
Testing and running the project
Once the Project Wizard has finished the installation, the project is ready to be tested.
1.
Locate the Workflow configuration in the Configurations\Workflow folder and open it in
OL Connect Workflow.
2.
Select the pr_prom_generate_output process.
3.
Open the Debug ribbon and click Run.
In Debug mode, the first Input task is skipped and the process is executed using a sample data
file. This project is pre-configured to use the file: Sample Data.xml.
Page 175