2019.1

on the white Imposition Sheet in the output preview (and validation) diagram.
Note
The logical page size can be set independently of any template open in the
Designer, allowing for output presets to be created independently from the active
template.
If a template is currently loaded in Connect Designer, the size and portrait attribute
of the first section of that template are used as defaults for the Sample Page.
As a general rule, it makes little sense to modify the Sample Page size within the
Print Wizard (as the template media size will already have been selected), but it
does make sense when creating Print Output Presets for other templates.
If no template is loaded or if the template does not have a Print section, then the
Sample Page defaults to A4 portrait.
l
Size: Use the drop-down to select the media size of the logical template page.
l
Orientation: Select orientation (aspect ratio) of the logical template page
(Landscape or Portrait).
l
The Width and Height values are real-only and appear for display and design
purposes only.
l
Imposition Sheet group: Use to select the physical media size that the logical pages will
be printed upon. This appears as the white background in the output preview (and
validation) diagram.
l
Size: Use the drop-down to select the size of the physical media the output is to be
printed upon.
l
Orientation: Select orientation (aspect ratio) of physical media sheet (Landscape or
Portrait).
l
The Width and Height values are real-only and appear for display and design
purposes only.
l Output diagram and validation. Use the settings here to control how the output diagram is
to look and behave. It contains the following options:
Page 1126