2019.1

l
Alphanumeric data field specific selections: Whether the alphanumeric string
"contains", "does not contain", "starts with" or "ends with" another string value.
The "is like" and the "is not like" selections allow the use of "*" wildcards.
The comparison string could be a manually entered string, or it could be another
textual data field.
In the Data Filtering Options rules editor the comparisons are always case sensitive.
In other rule editors there is an option to turn of case sensitivity.
l
Date data field specific selections: Whether the date field is "before"or "after"
another date entry, or "not before" or "not after" another date entry, or "is between"
two other date entries. The comparison date(s) can be a manually entered date, or it
could be other numeric data field(s).
l
Numeric data field specific selections: Whether the numeric fields is "less than",
"less than or equal to", "greater than" or "greater than or equal to" another number
entry. The comparison number could be a specified number, or it could be another
numeric data field.
l
Media Rule: This rule operates on either the Media Name or coating (either Front Coating
or Back Coating) .
For the Name value, the choice is a straight binary option based upon the selected Media
Name.
For the Coating values, the choice is about what type of coating applies (with an
"Unspecified" option as a fall back).
l
Binding Rule: This rule operates upon the binding that applies to the record.
The options are based on theStyle, Side, Location or Angle of the binding. The logical
operators that apply are dependent upon the type of Binding the test is being applied to.
l
Duplex Rule: This rule operates upon the record Duplex settings. This is a binary choice
between Duplex or non-Duplex.
l
Size Rule: This rule operates upon the size of the selected group. This could be the
amount of sub-groups contained within, or the amount of physical Sheets, Pages or
Sections. The logical operators that apply are dependent upon the group that the size test
is being applied to.
l
Property Rule: This rule compares a job Property value (such as "Control Scripts" on
page828 set within Designer) against a selected string. The comparison operators that
are available for this rule are the same as those for Alphanumeric Data Rules.
Page 1111