2019.1

l
Display size entry: Chose between a pre-set viewing percentage, or manually enter
whatever percentage you would like, or select Fit Page or Fit Width to have the
diagram display the page(s) within the diagram window dimensions.
l
Use the zoom in/out buttons / to increase or reduce the viewing percentage
by 25% increments.
l
Sample size entry: Set the sample output size here. The output diagram will change
dynamically to reflect the selection made here, if applicable.
The maximum Sample size is 10,000 for booklet imposition and 10,000,000 for
standard impositions.
l Output diagram:A real-time display that reflects the selections made in the
Imposition Options page. The blue page(s) are the individual logical page(s), upon
a white background that represents the physical Imposition Sheet.
If the settings are invalid, the display will appear as red, such as in the following
diagram:
In this example the error is that the logical pages are too large to fit upon the
Imposition Sheet that has been selected.
l
Position group: These settings apply to the positioning of the logical page(s) within the
Imposition Sheet.
l
Method selection: Set the position of the logical page(s) upon the Imposition Sheet.
The choices are as follows:
l
Center:Have the logical page(s) centered within the Imposition Sheet.
l
Scale to fit:Scales the logical page(s) so that they fit the Imposition Sheet
exactly.
Page 1033