Manualshelf

2018.2

ManualsBrandsObjectif Lune ManualsApplicationsPlanetPress Connect
431432433434435436437438439440
Table Of Contents
Rotating the Media in a Print section
The actual orientation of the Media and that of a section to which the Media is applied may not
match.
The Media can therefore be rotated per Print section:
l
On the Resources pane, expand the Print context; right-click the Print section, and click
Sheet configuration.
l
Click one of the options next to Media rotation.
The Media (to be more accurate: the Virtual Stationery images specified for this Media) will be
rotated accordingly in the entire section.
Note
l Any Virtual Stationery settings made for the Media also influence how the Media is
displayed in each section (see "Setting Media properties" on page429).
l Section backgrounds are rotated separately (see "Using a PDF file as background
image" on page412).
If in the Media properties, the Virtual Stationery position is set to Absolute, any offset given by
the Top and Left values will be applied after rotation. A Virtual Stationery image located
absolutely at the top left (Top: 0, Left: 0) will still appear at the top left of the page after rotating
the Media.
Printing virtual stationery
Media are not printed, unless you want them to. Printing the virtual stationery is one of the
settings in a Job Creation Preset. To have the virtual stationery printed as part of the Print
output:
1.
Create a job creation preset that indicates that Media has to be printed: select File >
Presets and see "Output Creation Settings" on page1006 for more details.
2. Select that job creation preset in the Print Wizard; see "Generating Print output" on
page1207.
Page 435