2018.2

For presets created in a version prior to Connect 2018.2, a "Reverse Pages"
selection will apply this Stack upside down setting.
l
Inverse page order:This impositions the output in the exact opposite order
from what has been selected.
For example, if the selected order was Top to bottom, left to right (down the
stack, left to right, top to bottom), then selecting Inverse page order would
result in output that was up the stack, right to left, bottom to top.
In the case of duplex impositioning, the front and back sides don't switch.
l
CropMarks group: Select to add Crop Marks to the printed output.
l
Type: Use the drop-down to select whether to add Crop Marks to the page or not,
and what type of Crop Marks to use. The Crop Mark types available are Standard or
Japanese.
l
Page side: What side(s) of the page to put the Crop Marks. The choices are Front,
Back or Both.
l
Width: Select the width of the crop mark lines.
l
Offset: How much separation (if any) to leave between the vertical and horizontal
corner markings.
l
Length: Select the Length of the crop mark lines.
Advanced Print Wizard navigation options
l
Preview button:Click to launch a Proof Preview window, which displays how the printed
output would look based upon the currently chosen selections.
l
Back and Next buttons:Used to navigate back and forth through all the selected options
within the Wizard. Up until the Print button is pressed, one can reverse all the way
through the wizard to return to the main selection page (the "Print Options" on page1007
page) and add or remove printing options from the print run.
l
Print button: Click to produce print output according to the current settings. This can be
done at any point within the Wizard, whether or not all the options selected in the "Print
Options" on page1007 page have been completed or not.
l
Cancel button:Cancels the Print Wizard, without creating any printout.
Page 1020