2018.2

diagram display the page(s) within the diagram window dimensions.
l
Use the zoom in/out buttons / to increase or reduce the viewing percentage
by 25% increments.
l
Sample size entry: Set the sample output size here. The number selected here will
be reflected within the output diagram, if applicable.
l Output diagram:A real-time display that reflects the selections made in the
Imposition Options page. The blue page(s) are the individual logical page(s), upon
a white background that represents the physical Imposition Sheet.
If the settings are invalid, the display will appear as red, such as in the following
diagram:
In this case the logical pages are too large to fit on the selected Imposition Sheet.
l
Position group: These settings apply to the positioning of the logical page(s) within the
Imposition Sheet.
l
Method selection: Set the position of the logical page(s) upon the Imposition Sheet.
The choices are as follows:
l
Center:Have the logical page(s) centered within the Imposition Sheet.
l
Scale to fit:Scales the logical page(s) so that they fit the Imposition Sheet
exactly.
l
Offset:Have the logical page(s) offset within the Imposition Sheet. The offset
values can be set in the Left and Top entry boxes, which only become
available for this positional method.
l
Left and Top values: These entry boxes are only enabled and their values applied
when the Offset method has been chosen. They are used to set the offset of the
Page 1015