1.8

Note
The offset measures from the top left of the physical N-Up sheet to the
top left imposition-ed page. If Auto-Rotate is selected(causing the N-Up
stock to be rotated to fit the imposition-ed pages) then the measurement
becomes the top left position of the rotated stock. i.e. The top left corner
does not rotate with the stock.
l
Rotate final output Sheet 180 degrees (upside down):Select to flip the output
upside down.
l
Repetition group:
Allows selection of how many Sections are to be placed, both Horizontally and Vertically.
This is the total number of items, not the number of additional items being placed.
Note
If Booklet Binding were selected, some of these settings will be determined by the
options made within the "Booklet Options" on page857 Page and they cannot be
altered here.
l
Gap group:
Allows selection of the amount of blank space (either Horizontal and/or Vertical) to add
between each page.
Note
If Booklet Binding were selected, some of these settings will be determined by the
options made within the "Booklet Options" on page857 Page and they cannot be
altered here.
Page 860