1.8

You can even select which specific pages are to be represented (up to page 1,000), whilst
page numbers appear on the pages in the diagram and change dynamically, like everything
else.
The Imposition selections that can be made are as follows:
l
Sheet Size group:
l
Final Media Size: Use the drop-down to select the size of the media where the
output is printed. The size of the media should be equivalent to the initial Section
size multiplied by the number of repetitions, added with the margins and spaces
between the repetitions.
If Custom media size is selected, enter the custom Width and Height values.
Note
The Sheet Size cannot be altered if a Cover Page was selected in the
"Booklet Options" on page857 Page.
l
Orientation: Select orientation (aspect ratio) of media (Landscape or Portrait), or
allow Connect to automatically determine the proper aspect ratio (Auto-Rotate).
l
Position: Select from following options:
Note
If "Booklet Options" on page857 were selected, then the Position settings
are pre-set and cannot be altered here.
l
Auto-positioned: This option creates unscaled imposition-ed pages.
l
Scale to fit: Scales the imposition-ed pages so they fit on the N-Up stock. The
scaled pages are then auto-positioned as usual.
l
Offset: Allows for the selection of an offset position. The imposition-ed pages
will be laid out so that the top left corner of the top left imposition-ed page is
located at the selected offset.
If Offset is chosen, then the Left Offset and Top Offset selection boxes
Page 784