1.8

l
Path. The complete syntax of the path is:file://<host>/<path>. Note: if the host
is"localhost", it can be omitted, resulting infile:///<path>, for example:
file:///c:/resources/images/image.jpg.
l
Browse: opens an explorer window to browse folders and select an image.
Url lets you select an image file from a specific web address. Select the protocol and then enter
the URL (for example, http://www.mysite.com/images/image.jpg). A preview of the selected
image will be shown below.
l
Protocol: http or https.
The option Save with template, available when choosing an image from disk or by URL,
inserts the file in the Images folder on the Resources pane. If not saved with the template, the
image will remain external.
Note
External images need to be available when the template is merged with a record set to generate
output, and their location should be accessible from the machine on which the template's output is
produced. External images are updated (retrieved) at the time the output is generated.
Sheet Configuration dialog
The Sheet Configuration dialog defines how different Print context sections output on different
Media (see "Media" on page353) and using different Master Pages (see "Master Pages" on
page350).
General options
The first option defines Duplex printing, which also enables or disables the settings for the
Back side of each sheet.
If Duplex is enabled, you can also:
l
Check Omit empty back side for Last or Single sheet to reset a page to Simplex if it
has an empty back side. Thus changing a Duplex job into a Mixplex job may reduce
volume printing costs as omitted back sides aren't included in the number of printed
pages.
Page 726