1.7

Note:These print runs cannot be saved as presets and can only be replicated in the following
print run, using the Last Used option.
The output settings are determined by selections made throughout the Wizard. For example, if
you want to add Inserter Marks to the output, you select the Add Inserter Marks option on the
first page of the Wizard, and the Inserter Options page will then appear later in the Wizard.
The first page of the Advanced Printer Wizard is the "Print Options" on page766 page.
Adding print output models to the Print Wizard
Connect comes with several pre-prepared print output models. These include Printer Control
Language (PCL), Portable Document Format (PDF) and PostScript (including the PostScript
variants of PPML, VIPP and VPS).
To keep the Print Wizard interface manageable only a limited range of print output models are
available by default. Additional print output models can be added to the list at any time, though.
They can be selected from the range of pre-prepared models that come with Connect. The
following topic describes how to do this.
After they have been added, the newly selected print output models will be available in the
Print Wizard thereafter.
How to add print output models from within the Print Wizard
Here is how to add print output options from within the Print Wizard dialog itself.
1.
Select File > Print... from the menu. The Print dialog will be launched.
2.
Click on the Advanced button. The Print Wizard will be launched.
3.
Click the settings button at the end of the Model selection.
4.
Select Edit available printers from options.
5.
In the Preferences dialog, select the print output models to be added to the PrintWizard,
then click OK.
How to add print output models from within the Designer
Here is how to add print output models from within the main Designer interface itself.
Page 865