1.7

l
Maximum speed units:
l
Small job limit: Enter the maximum number of speed units that can run smallprint
jobs.
l
Medium job limit: Enter the maximum number of speed units that can run medium
print jobs.
l
Large job limit: Enter the maximum number of speed units that can run large print
jobs.
Server Security Settings
This dialog controls the security settings for external applications connecting to the PlanetPress
Connect Server, such as PlanetPress Workflow or scripts communicating through the REST
API.
Warning
It is highly recommended to keep security enabled and change the password on any server that
accessible from the web. If these precautions are not taken, data saved in the server may be
accessible from the outside!
l
Enable server security: Enable to add authentication to the REST server.
- When enabled, the same username and password (which cannot be blank) must be
entered in any remote Connect Designer that links to this Server. The Designer username
and password entries can be found under the "Print Preferences" on page628 section of
the Designer Preferences dialog.
- When disabled, a username and password is not required to make REST request, and
tasks in PlanetPress Workflow do not require them in the Proxy tab. Nor would a
username and password be required on any remote Connect Designer that links to this
Server.
l
Administrator's username: Enter the username for the server security. The default
username is ol-admin.
l
Administrator's password: Enter a password for the server security. The default
password is secret.
l
Confirm password: Re-enter the password for the server security.
Page 75