1.7

produced. External images are updated (retrieved) at the time the output is generated.
Sheet Configuration dialog
The Sheet Configuration dialog defines how different Print context sections output on different
Media (see "Media" on page325) and using different Master Pages (see "Master Pages" on
page322).
There are multiple groups, each defining the settings for pages grouped by their position within
the section as it outputs: First, Middle, Last and Single sheets.
The first option defines Duplex printing, which also enables or disable the Back side of each
sheet.
If Duplex is enabled, you can also check Tumble to duplex pages as in a calendar, and Facing
pages to have the margins of the section switch alternately, so that pages are printed as if in a
magazine or book.
If the option Same for all positions is checked, the same Master Page and Media will be
applied to every page in the Print section.
Each group defines:
l
Allow content on: Selects on which face of the sheet content is allowed. If Front only or
Back only is selected, the page acts as a Simplex page even if Duplex printing is
enabled.
l
Media: Defines the media that is used. If the Media has Virtual Stationery defined, the
selected image is shown as a background to each page that corresponds to the media's
sheet position.
l
Master Page Front: Defines the Master Page used for the front of the selected sheet's
position.
l
Master Page Back: Defines the Master Page used for the back of the selected sheet's
position.
Page 649